Alarm Functions At A Glance; Setting And Unsetting - Eaton i-on16 Administrator's And User Manual

i-on16

Alarm Functions At a Glance

Navigation:
up, down, left, right
NO
OK
Key in access code
here

Setting and Unsetting

I :
N ORDER TO
Turn the system on:
Turn the system off:
Turn on part of the system: EITHER:
For more information see page 19 .
Display shows:
Time and date when system off (unset).
First zone to alarm after alarm
Read log here.
Glowing = On (set)
Off = Off (unset)
Flashing = Part Set
(part setting systems only)
Hold prox tag near face of keypad.
D :
O THIS
EITHER:
Key in ACCESS CODE
and press 
OR present tag.
Then leave the premises
and close door.
Open entry door, go to
keypad.
At the keypad EITHER:
key in ACCESS CODE
OR: present tag.
Key in ACCESS CODE
OR present tag.
Then press  or .
followed by .
HUA/PA keys
Key in access code
here
T :
HE SYSTEM WILL
Start the exit tone.
Stop exit tone and turn on.
Start entry tone.
Stop entry tone and turn
off.
System turns on part of the
system you selected.
Page 85