Eaton i-on16 Administrator's And User Manual page 73

i-on16
20. Press .
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
25. Press  to leave the menu.
Note: You can switch the output on and off from the Menu by selecting
Outputs On/Off (see page 81).
If you want to program a remote control to control the output, see
page 72.
To Program On and Off Times for Latched Outputs
First make sure that the output you wish to use is programmed as Latched
= Yes (see steps 1 to 16 starting on page 64).
17. Press  until the display shows:
18. Press .
The display shows the time when
the output will turn on.
19. Key in the time when you want the
output to come on. Use the 24-hour
clock in the format hh/mm. If the
hours or minutes are "9" or less
then key in a leading zero. For
example: six minutes past seven in
the morning will be "07/06".
20. Press .
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
21. Press  until the display shows:
22. Press .
The display shows the time when
the output will turn off.
23 Key in the time when you want the
output to go off. Use the 24-hour
clock in the format hh/mm. If the
4. Administration
















Page 67