Eaton i-on16 Administrator's And User Manual page 49

i-on16
Press  until the display shows:
7.
Press .
8.
The display asks you to press both
of the buttons on the Hold Up
Alarm.
Note: If you already have a Hold Up Alarm
allocated to you then the screen
will display "Delete Hold Up
Alarm?". See page 43.

Press to leave the menu
without deleting the Hold Up
Alarm, or if you change your
mind and do not wish to add a
Hold Up Alarm.
9. Press and hold both buttons on the
Hold Up Alarm that you wish to
register. Hold the buttons down until
you see the transmit LED flash.
The keypad gives a double "beep"
confirmation tone. The keypad
display shows:
The control unit learns the identity of
the Hold Up Alarm and links it with
your access code.
You cannot register more than one radio HUA per user. If the control unit
has already learned that radio HUA then you will hear a low tone and the
display remains unchanged, asking you to press the buttons on the radio
HUA.
If you have a radio HUA and want to know who it belongs to then use the
Test – User Hold Up Alarms menu option, see page 49 .
Deleting Remote Controls, Two-way Keyfobs, Tags and
Radio HUAs
If you have lost a remote control, two-way keyfob, prox tag or radio Hold Up
Alarm assigned to you then you should delete it from the system to make
sure that no unauthorised person can use it.






followed by:


4. Administration
Page 43