4. Administration
2.
Press
.
3.
Key in your access code (or
present a tag).
Press until you see:.
4.
Press .
5.
The bottom line of the display
shows:
Press until you see:
6.
Press .
7.
The bottom line of the display
shows:
Press or to turn a chime tone
8.
on or off.
When the chime tone is on, the
keypads and loudspeakers will
sound a chime tone for each zone
that triggers while you are
performing the walk test.
Press . to see the first of the walk
9.
test options:
The Walk Test menu provides two options to give different ways of
organising a walk test. The options within Walk Test are:
System
This option allows you to walk round the entire system and
test all the zones. Press to select this option.
Zones
This option lets you select one or more individual zones,
and test only those zones and no others.
Press or to scroll up and down the list of zones. Press
or to display "Yes" at the end of the bottom line to
mark the zone as one you want to test. Press when you
have finished making your selection.
Page 54
i-on16