Flitecharts Cycle Number And Expiration Date - Garmin G1000 Manual

FLITECHARTS CYCLE NUMBER AND EXPIRATION DATE

FliteCharts data is revised every 28 days. Charts are still viewable during a period that extends from the cycle
expiration date to the disables date. FliteCharts is disabled 180 days after the expiration date and are no longer
available for viewing upon reaching the disables date. After the expiration date, the FliteCharts database is no
longer current, however, data displayed on the actual charts may still be current. When viewing charts after the
FliteCharts database has expired, ensure the displayed chart is current before using.
When turning on the system, the Power-up Page displays the current status of the FliteCharts database. See
the table below for the various FliteCharts Power-up Page displays and the definition of each.
Power-up Page Display
Other possible AUX - System Status page conditions are shown in Figure 8-70. 'FliteCharts Expires' plus a
date in white, indicates the chart database is current. 'Chart data is out of date!' in yellow, indicates charts are
still viewable, but approaching the disable date.
190-00709-05 Rev. D
Figure 8-69 Power-up Page, FliteCharts Database
Blank Line. system is not configured for FliteCharts. Contact a Garmin‑
authorized service center for configuration.
System is configured for FliteCharts but no chart database is installed.
Refer to Updating Garmin Databases in Appendix B for the FliteCharts
database
Normal operation. FliteCharts database is valid and within current
cycle.
FliteCharts database is beyond the expiration date, but still within the
180 day viewing period.
FliteCharts database has timed out. Database is beyond 180 days
after expiration date. FliteCharts database is no longer available for
viewing.
Table 8-3 FliteCharts Power-up Page Annunciations and Definitions
Garmin G1000 Pilot's Guide for the Socata TBM 850/900
ADDITIONAL FEATURES
FliteCharts Database
Definition
603