AUDIO PANEL AND CNS
VIEWING AN ATC MESSAGE
Some ATC messages do not require a response, however they do need to be viewed.
To view an ATC message:
1) From the MFD, select the CPDLC Softkey.
2) Turn the large FMS Knob to place the selection cursor over the desired message to view and press the ENT Key.
VIEWING CPDLC MESSAGE DIALOGS
The status of a string of messages, or dialog, may be checked and past message dialogs viewed. When the
G1000 system power is cycled, the list of message dialogs is deleted.
To view message dialogs:
1) From the MFD, select the CPDLC Softkey.
2) Turn the large FMS Knob to place the selection cursor over the desired message to view and press the ENT Key.
3) Press the ENT Key to view the CPDLC Thread.
136
Figure 4-24 CPDLC Response
Garmin G1000 Pilot's Guide for the Socata TBM 850/900
190-00709-05 Rev. D