Garmin G1000 Manual page 581

Select the PFD1 DB Softkey. The softkey label will change to PFD2 DB. The DATABASE window will now
display database information for PFD2. Again, scroll through the listed information by turning the FMS Knob
or pressing the ENT Key until the SafeTaxi database information is shown.
Refer to Updating Garmin Databases in Appendix B for instructions on revising the SafeTaxi database.
Figure 8-19 illustrates possible SafeTaxi database conditions that may appear on the AUX - System Status
Page. The EFFECTIVE date is the beginning date for this database cycle. If the present date is before the
effective date, the EFFECTIVE date appears in yellow and the EXPIRES date appears in blue. The EXPIRES date
is the revision date for the next database cycle. NOT AVAILABLE indicates that SafeTaxi is not available on the
database card or no database card is inserted.
Current Date is before Effective Date
190-00709-05 Rev. D
SafeTaxi Database has Expired
Figure 8-19 AUX – System Status Page, SafeTaxi Database Status
Garmin G1000 Pilot's Guide for the Socata TBM 850/900
ADDITIONAL FEATURES
SafeTaxi Database Not Installed
567