Garmin G1000 Manual page 280

FLIGHT MANAGEMENT
Removing a user-defined hold at an off-route direct-to:
1) Press a Direct To Key to display the DIRECT TO Window (PFD or MFD).
2) Press the MENU Key to display the PAGE MENU with the cursor on the 'Cancel Direct-To NAV' selection.
3) Press the ENT Key. The holding pattern is removed.
Hold Entry Course
Leg Length Mode Button
Map of Hold Location
Figure 5-90 Creating a User Defined Holding Pattern at the Aircraft Present Position
266
(TIME or DIST))
Garmin G1000 Pilot's Guide for the Socata TBM 850/900
Hold At
Present
Position
Menu
Selection
Location of Hold
Course Direction
(INBOUND or OUTBOUND)
Leg Length
(Time in nm or Distance in minutes)
Turn Direction
(RIGHT or LEFT)
Expect Further Clearance Time
Activate Hold
190-00709-05 Rev. D