Garmin G1000 Manual page 71

Vspeeds (V
References Window. When active (on), the Vspeeds are displayed at their respective locations to the right of
the airspeed scale. All Vspeed values are reset and all Vspeed flags are turned off during power up.
Changing Vspeeds and turning Vspeed flags on/off:
1) Press the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the field of the desired Vspeed to be changed.
3) Use the small FMS Knob to change the Vspeed in 1-kt increments. When a speed has been changed from a
default value, an asterisk appears next to the speed.
4) Press the ENT Key or turn the large FMS Knob to highlight the ON/OFF field.
5) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
6) To remove the window, press the CLR Key or the TMR/REF Softkey.
Figure 2-5 Timer/References Window
Turning all Vspeed flags on/off:
1) Press the TMR/REF Softkey.
2) Press the MENU Key.
3) To activate all Vspeed flags, press the ENT Key with All References On highlighted.
4) To remove all Vspeed flags, turn the FMS Knob to highlight All References Off and press the ENT Key.
Restoring all defaults:
1) Presst the TMR/REF Softkey.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight Restore Defaults and press the ENT Key.
190-00709-05 Rev. D
, V , V , and V ,) can be changed and the Vspeed flags can be turned on/off from the Timer/
R X Y APP
Garmin G1000 Pilot's Guide for the Socata TBM 850/900
FLIGHT INSTRUMENTS
Figure 2-6 Timer/References Menu
57