Garmin G1000 Manual page 601

The ChartView time critical information can also be found on the AUX - System Status page. The database
CYCLE number, EXPIRES, and DISABLES dates of the ChartView subscription appear in either blue or yellow
text. When the ChartView EXPIRES date is reached, ChartView becomes inoperative 70 days later. This is
shown as the DISABLES date. When the DISABLES date is reached, charts are no longer available for viewing.
The SHW CHRT Softkey label then appears subdued and is disabled until a revised issue of ChartView is
installed.
A subdued softkey label indicates the function is disabled.
NOTE:
Select the MFD1 DB Softkey to place the cursor in the DATABASE window. Scroll through the listed
information by turning the FMS Knob or pressing the ENT Key until the ChartView database information is
shown.
The ChartView database cycle number shown in the figure, 1304, is deciphered as follows:
13 – Indicates the year 2013
04 – Indicates the fourth issue of the ChartView database for the year
The EXPIRES date 05–MAR–13 is the date that this database should be replaced with the next issue.
The DISABLES date 14–MAY–13 is the date that this database becomes inoperative.
The ChartView database is obtained directly from Jeppesen. Refer to Updating Jeppesen Databases in
Appendix B for instructions on revising the ChartView database.
190-00709-05 Rev. D
Figure 8-47 AUX – System Status Page, ChartView Current and Available
Garmin G1000 Pilot's Guide for the Socata TBM 850/900
ADDITIONAL FEATURES
ChartView
Data
587