Creating A Message - Garmin G1000 Manual

CREATING A MESSAGE

Creating a message consists of choosing from a pre-determined list of requests, entering the required
information, and sending the request.
To create messages:
1) From the MFD, select the CPDLC Softkey.
2) Select the NEW Softkey. The CPDLC Thread Window appears.
3) With the Response/Request field highlighted, turn the small FMS Knob to select the desired request from the
list and press the ENT Key. For discussion purposes, 'Request [level]' is selected.
190-00709-05 Rev. D
NEW Softkey
Figure 4-20 CPDLC New Softkey
Figure 4-21 CPDLC Request
Garmin G1000 Pilot's Guide for the Socata TBM 850/900
AUDIO PANEL AND CNS
133