Garmin G1000 Manual page 87

When set to Auto (default), the GPS CDI scale automatically adjusts to the desired limits based upon the
current phase of flight (Figure 2-29, Table 2-1).
Departure
• Once a departure procedure is activated, the CDI is scaled for departure (0.3 nm).
• The system switches from departure to terminal CDI scaling (1.0 nm) under the following conditions:
- The next leg in the departure procedure is not aligned with the departure runway
- The next leg in the departure procedure is not a CA, CD, CF, CI, CR, DF, FA, FC, FD, FM, IF, or TF (see
Glossary for leg type definitions)
190-00709-05 Rev. D
Figure 2-28 GPS CDI Settings
(AUX - System Setup Page)
Terminal Enroute
Figure 2-29 Automatic CDI Scaling
Garmin G1000 Pilot's Guide for the Socata TBM 850/900
FLIGHT INSTRUMENTS
Refer to accompanying
approach CDI scaling figures
Terminal Approach
Missed
Approach
73