Garmin G1000 Manual page 85

Fix Prior to the FAF
Glideslope Intercept Point
If the same VOR/LOC navigation source is selected on both PFDs, the navigation source annunciation turns
yellow on both displays (unless synchronized). Once the CDIs are synchronized (CDI Synchronization turned
on), they remain synchronized until the setting is changed. When turning on the G1000 for use, the system
remembers the last CDI synchronization setting.
Synchronizing the CDIs:
1) Select the AUX - System Setup Page using the FMS Knob.
2) Press the FMS Knob to activate the cursor. Time Format is highlighted.
3) Turn the large FMS Knob to highlight the CDI Synchronization ON/OFF field.
4) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
5) Press the FMS Knob to remove the cursor.
190-00709-05 Rev. D
Figure 2-26 ILS Approach with Glideslope Intercept Point at Fix Prior to the FAF
Garmin G1000 Pilot's Guide for the Socata TBM 850/900
FLIGHT INSTRUMENTS
71