Garmin G1000 Manual page 366

Integrated flight deck

Hide thumbs Also See for G1000:

Table of Contents

HAZARD AVOIDANCE

Raw METAR text is also accessible while panning the map cursor over a METAR flag on any map page on

which a METAR is displayed. The METAR text is shown in a box near the METAR flag.

In addition, METAR flags and their associated text are displayed on the Active Flight Plan Page on the MFD.

METAR flags appears next to waypoints in the flight plan with an associated METAR.

Displaying raw METAR text on the Active Flight Plan Page:

1) Select the Active Flight Plan Page on the MFD.

2) Press the FMS Knob to activate the cursor.

3) Turn the large FMS Knob to highlight a waypoint with an associated METAR. The METAR text will appear in the

'SELECTED WAYPOINT WEATHER' Window below.

4) When finished, press the FMS Knob to remove the cursor or press the FPL Key to exit the Active Flight Plan

To display the METAR legend on the Weather Data Link (XM) Page, select the LEGEND Softkey when

METARs are selected for display.

The METAR flag color is determined by the information in the METAR text. The METAR flag is gray when

the METAR text does not contain adequate information.

Figure 6-25 METAR and TAF with Text

Figure 6-26 METAR Legend

Garmin G1000 Pilot's Guide for the Socata TBM 850/900

Original TAF

190-00709-05 Rev. D

Show Quick Links

Table of Contents