Garmin G1000 Manual page 639

The pop-up alert may be inhibited at times, such as during takeoff. In addition to the pop-up alert, a ringing
phone symbol is displayed to the right of the MFD page title as shown in Figure 8-91.
Incoming Call Pop-up
Answering an incoming call:
1) Press the TEL Key on the audio panel.
2) Select the ANSWER Softkey on the MFD.
Or :
While viewing the AUX‑TELEPHONE Page:
The Push-to-Talk switch is not utilized for telephone communication. The microphone is active after
NOTE:
selecting the ANSWER Softkey, and stays active until the call is terminated.
1) Press the TEL Key on the audio panel.
2) Press the MENU Key to display the Page Menu.
3) Turn either FMS Knob to place the cursor on 'Answer Incoming Call'.
4) Press the ENT Key.
Selecting the IGNORE Softkey will extinguish the pop-up window and leave the current call unanswered.
Selecting the IGNRE ALL Softkey will extinguish the pop-up window for the current and all future incoming
calls and leave the current call unanswered. Selecting the TEL Softkey will display the AUX-TELEPHONE
Page allowing additional call information to be viewed before answering.
Disabling incoming call alerts:
1) With the AUX‑TELEPHONE Page displayed, press the MENU Key on the MFD to display the Page Menu.
2) Turn either FMS Knob to place the cursor on 'Disable Incoming Call Alerts'.
3) Press the ENT Key. The voice and pop‑up alert will not be displayed now when an incoming call is received.
OUTGOING CALLS
Voice calls can be made from the cockpit to an external phone through the Iridium Satellite Network.
The Push-to-Talk switch is not utilized for telephone communication. The microphone is active after
NOTE:
selecting the ANSWER Softkey, and stays active until the call is terminated.
190-00709-05 Rev. D
Figure 8-91 Incoming Call
Garmin G1000 Pilot's Guide for the Socata TBM 850/900
ADDITIONAL FEATURES
Incoming Call Symbol on MFD Page
625