Accessing Garmin Connext Weather Products - Garmin G1000 Manual

HAZARD AVOIDANCE
6) Enter the access code provided by Garmin Flight Data Services in the 'ACCESS CODE' field.
7) Press the ENT Key. 'REGISTER' is highlighted as in Figure 6-57.
8) Press the ENT Key. The system contacts Garmin through the Iridium network. System registration is complete
when 'REGISTERED' appears in the STATUS field.

ACCESSING GARMIN CONNEXT WEATHER PRODUCTS

The principal map for viewing Garmin Connext weather information is the Weather Data Link (CNXT)
Page in the Map Page Group (Figure 6-58). This is the only map display capable of showing information for
all available Garmin Connext weather products. This page is also used to select a weather data link source, if
more than one source (such as SiriusXM Weather) has also been installed. The displayed weather products and
softkeys correspond to the selected weather data link source. No weather information is displayed until the
first Connext Data Request is made.
Viewing the Weather Data Link (CNXT) Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Weather Data Link (CNXT or XM) Page.
3) If the page title displays 'MAP - WEATHER DATA LINK (XM)' and Garmin Connext (CNXT) data is desired,
proceed to the next step to change the weather data link source to Garmin Connext
4) Press the MENU Key.
5) Turn the FMS Knob to highlight 'Display Connext Weather' and press the ENT Key. Page title displays 'MAP -
WEATHER DATA LINK (CNXT)' to indicate Garmin Connext is the selected weather data link source.
Only one weather data link source may be selected for display at a time. If Garmin Connext is selected,
optional SiriusXM Weather data (and corresponding softkeys) are removed.
372 Garmin G1000 Pilot's Guide for the Socata TBM 850/900 190-00709-05 Rev. D