Terminal Procedures Charts - Garmin G1000 Manual

ADDITIONAL FEATURES

TERMINAL PROCEDURES CHARTS

Selecting Terminal Procedures Charts:
While viewing the Navigation Map Page, Nearest Airport Page, or Flight Plan Page, select the SHW CHRT
Softkey.
Or :
1) Press the MENU Key to display the PAGE MENU.
2) Turn the large FMS Knob to scroll through the OPTIONS Menu to Show Chart.
3) Press the ENT Key to display the chart.
Navigation Map Page OPTIONS Menu
On the Waypoint Airport Information Page OPTIONS Menu, select the desired chart and press the ENT Key
to display the chart.
When no terminal procedure chart is available, the banner CHART NOT AVAILABLE appears on the screen.
The CHART NOT AVAILABLE banner does not refer to the FliteCharts subscription, but rather the availability
of a particular airport chart selection or procedure for a selected airport.
If there is a problem in rendering the data (such as a data error or a failure of an individual chart), the banner
UNABLE TO DISPLAY CHART is then displayed.
570
Figure 8-22 Option Menus
Figure 8-23 Chart Not Available Banner
Figure 8-24 Unable To Display Chart Banner
Garmin G1000 Pilot's Guide for the Socata TBM 850/900
Waypoint Airport Information Page OPTIONS Menu
190-00709-05 Rev. D