Selected Altitude Intercept Arc - Garmin G1000 Manual

SELECTED ALTITUDE INTERCEPT ARC

The map can display the location along the current track where the aircraft will intercept the selected altitude.
The location will be shown as a cyan arc when the aircraft is actuallly climbing or descending.
Displaying/removing the selected altitude intercept arc:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the 'Map' group.
4) Press the ENT Key.
5) Highlight the 'SEL ALT ARC' field.
6) Select 'On' or 'Off'.
7) Press the FMS Knob to return to the Navigation Map Page.
190-00709-05 Rev. D
Range to
Altitude Arc
Figure 5-30 Navigation Map - Range to Altitude Arc
Garmin G1000 Pilot's Guide for the Socata TBM 850/900
FLIGHT MANAGEMENT
199