Garmin G1000 Manual page 428

HAZARD AVOIDANCE
Displaying weather on the Weather Radar Page:
1) Select the Weather Radar Page in the Map Page Group with the FMS Knob.
2) Select the MODE Softkey.
3) While on the ground, select the STANDBY Softkey. A one-minute warm-up period is initiated (countdown is
displayed on the screen). After the warm-up is complete, the radar enters the Standby Mode.
a) Select the WEATHER Softkey. A confirmation window is displayed.
b) Turn the small FMS Knob to highlight YES and press the ENT Key to continue radar activation.
OR :
If the aircraft is airborne, select the WEATHER Softkey. A one-minute warm-up period is initiated (countdown
is displayed on the screen). After the warm-up is complete, the radar begins transmitting.
4) Turn the RANGE Knob to select the desired map range.
5) The horizontal scan is initially displayed (Figure 6-106). If desired, select the VERTICAL Softkey to change to
vertical scanning.
414
Figure 6-107 Confirming Activating Radar
Garmin G1000 Pilot's Guide for the Socata TBM 850/900 190-00709-05 Rev. D