System Status - Garmin G1000 Manual

Muting the "TIS Not Available" voice alert:
1) Select the Traffic Map Page.
2) Select the TNA MUTE Softkey. The status is displayed in the upper left corner of the Traffic Map Page.
Or :
a) Press the MENU Key.
b) Select '''Not Available" Mute On' (shown if TNA muting is currently off) and press the ENT Key.

SYSTEM STATUS

The G1000 performs an automatic test of TIS during power-up. If TIS passes the test, TIS enters Standby
Mode (on the ground) or Operating Mode (in the air). If TIS fails the power up test, an annunciation is shown
in the center of the Traffic Map Page.
Traffic Map Page
UNAVAILABLE
* Contact a service center or Garmin dealer for corrective action
System Test has Failed
190-00709-05 Rev. D Garmin G1000 Pilot's Guide for the Socata TBM 850/900
Annunciation
NO DATA Data is not being received from the transponder*
Data is being received from the transponder, but
DATA FAILED
a failure is detected in the data stream*
FAILED The transponder has failed*
TIS is unavailable or out of range
Table 6-28 TIS Failure Annunciations
Figure 6-169 TIS Power-up Test Failure
HAZARD AVOIDANCE
Description
Data Not Received
from Transponder
473