Flitecharts Cycle Number And Expiration Date - Garmin G1000H Pilot's Manual

ADDITIONAL FEATURES

FLITECHARTS CYCLE NUMBER AND EXPIRATION DATE

FliteCharts data is revised every 28 days. Charts are still viewable during a period that extends from the
cycle expiration date to the disables date. FliteCharts are disabled 180 days after the expiration date and are no
longer available for viewing upon reaching the disables date. When turning on the system, the Power-up Page
displays the current status of the FliteCharts database. See the table below for the various FliteCharts Power-up
Page displays and the definition of each.
Power-up Page Display
Other possible AUX - System Status page conditions are shown in Figure 8-68. 'FliteCharts Expires' plus a
date in white, indicates the chart database is current. 'Chart data is out of date!' in yellow, indicates charts are
still viewable, but approaching the disable date.
426
Figure 8-67 Power-up Page, FliteCharts Database
Blank Line. System is not configured for FliteCharts. Contact a
Garmin-authorized service center for configuration.
System is configured for FliteCharts but no chart database is installed.
Refer to Updating Garmin Databases in Appendix B for the FliteCharts
database.
Normal operation. FliteCharts database is valid and within current
cycle.
FliteCharts database is beyond the expiration date, but still within the
180 day viewing period.
FliteCharts database has timed out. Database is beyond 180 days
after expiration date. FliteCharts database is no longer available for
viewing.
Table 8-3 FliteCharts Power-up Page Annunciations and Definitions
Garmin G1000H ™ Pilot's Guide for the Bell 407GX
FliteCharts Database
Definition
190-01255-00 Rev. A