Flitecharts Cycle Number And Expiration Date - Garmin G950 Pilot's Manual

ADDITIONAL FEATURES

FLITECHARTS CYCLE NUMBER AND EXPIRATION DATE

FliteCharts data is revised every 28 days. Charts are still viewable during a period that extends from the cycle
expiration date to the disables date. FliteCharts is disabled 180 days after the expiration date and are no longer
available for viewing upon reaching the disables date. When turning on the system, the Power-up Page displays
the current status of the FliteCharts database. See the table below for the various FliteCharts Power-up Page
displays and the definition of each.
Power-up Page Display
Other possible AUX - System Status page conditions are shown in Figure 8-70. 'FliteCharts Expires' plus a
date in white, indicates the chart database is current. 'Chart data is out of date!' in yellow, indicates charts are
still viewable, but approaching the disable date.
When the 180 day grace period has expired, 'Chart data is disabled.' in yellow indicates that the FliteCharts
database has expired and is no longer viewable. 'Chart Data: N/A' appears in white if no FliteCharts data is
available on the database card or no database card is inserted.
422
Figure 8-69 Power-up Page, FliteCharts Database
Blank Line. system is not configured for FliteCharts. Contact a Garmin‑
authorized service center for configuration.
System is configured for FliteCharts but no chart database is installed.
Refer to Updating Garmin Databases in Appendix B for the FliteCharts
database
Normal operation. FliteCharts database is valid and within current
cycle.
FliteCharts database is beyond the expiration date, but still within the
180 day viewing period.
FliteCharts database has timed out. Database is beyond 180 days
after expiration date. FliteCharts database is no longer available for
viewing.
Table 8-3 FliteCharts Power-up Page Annunciations and Definitions
Garmin G950 Pilot's Guide for the Pilatus PC-6
FliteCharts Database
Definition
190-00870-02 Rev A