Terrain-Svs Page - Garmin G1000 Manual

Figure 6-132 Navigation Map Page Menu
Figure 6-133 Navigation Map Page Setup Menu

TERRAIN-SVS PAGE

The Terrain-SVS Page is specialized to show terrain, obstacle, and potential impact point data in relation
to the aircraft' s current altitude, without clutter from the basemap. Aviation data (airports, VORs, and other
NAVAIDs) can be displayed for reference. If an obstacle and the projected flight path of the aircraft intersect,
the display automatically zooms in to the closest potential point of impact on the Terrain-SVS Page.
Aircraft orientation on this map is always heading up unless there is no valid heading. Two views are available
relative to the position of the aircraft; the 360° default display and the radar-like ARC (120°) display. Map range
is adjustable with the RANGE Knob from 1 to 200 nm, as indicated by the map range rings or arcs.
Displaying the Terrain-SVS Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Terrain-SVS Page.
Changing the Terrain-SVS Page view:
1) Select the VIEW Softkey.
2) Select the 360 or ARC Softkey to select the desired view.
Or :
1) Press the MENU Key.
2) Select 'View Arc' or 'View 360º', dependent on current state, and press the ENT Key to change the view.
190-00709-05 Rev. D Garmin G1000 Pilot's Guide for the Socata TBM 850/900
Figure 6-134 Navigation Map Page Setup Menu, Map Group
HAZARD AVOIDANCE
441