Garmin G1000 Manual page 7

The PFD and MFD displays use a lens coated with a special anti-reflective coating that is very
CAUTION:
sensitive to skin oils, waxes, and abrasive cleaners. CLEANERS CONTAINING AMMONIA WILL HARM THE
ANTI-REFLECTIVE COATING. It is very important to clean the lens using a clean, lint-free cloth and an
eyeglass lens cleaner that is specified as safe for anti-reflective coatings.
The system does not contain any user-serviceable parts. Repairs should only be made by an
CAUTION:
authorized Garmin service center. Unauthorized repairs or modifications could void both the warranty and
the pilot's authority to operate this device under FAA/FCC regulations.
All visual depictions contained within this document, including screen images of the panel and
NOTE:
displays, are subject to change and may not reflect the most current system and databases. Depictions of
equipment may differ slightly from the actual equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
NOTE:
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
The data contained in the terrain and obstacle databases comes from government agencies. Garmin
NOTE:
accurately processes and cross-validates the data, but cannot guarantee the accuracy and completeness of
the data.
This product, its packaging, and its components contain chemicals known to the State of California
NOTE:
to cause cancer, birth defects, or reproductive harm. This notice is being provided in accordance with
California's Proposition 65. If you have any questions or would like additional information, please refer to
our web site at www.garmin.com/prop65.
Interference from GPS repeaters operating inside nearby hangars can cause an intermittent loss of
NOTE:
attitude and heading displays while the aircraft is on the ground. Moving the aircraft more than 100 yards
away from the source of the interference should alleviate the condition.
Operating the system in the vicinity of metal buildings, metal structures, or electromagnetic fields can
NOTE:
cause sensor differences that may result in nuisance miscompare annunciations during start up, shut down,
or while taxiing. If one or both of the sensed values are unavailable, it will be annunciated as a 'NO COMP'
(no compare).
Use of polarized eyewear may cause the flight displays to appear dim or blank.
NOTE:
Garmin G1000 Pilot's Guide for the Socata TBM 850/900
WARNINGS, CAUTIONS, AND NOTES
iii