Garmin G1000 Manual page 351

HAZARD AVOIDANCE
If the selected map range is less than 10 nm, the system automatically removes the weather products from the
map, with the exception of METARS, which remain displayed when METARs are enabled.
Setting up and customizing the Weather Data Link (XM) Page:
1) Select the Weather Data Link (XM) Page.
2) Press the MENU Key.
3) With 'Weather Setup' highlighted, press the ENT Key (Figure 6-4).
4) Turn the small FMS Knob to select 'Product Group 1' or 'Product Group 2', and press the ENT Key (Figure
6-5).
5) Turn the large FMS Knob or press the ENT Key to scroll through product selections.
6) Turn the small FMS Knob to scroll through options for each product (ON/OFF, range settings, etc.).
7) Press the ENT Key to select an option.
8) Press the FMS Knob or CLR Key to return to the Weather Data Link (XM) Page with the changed settings.
Figure 6-4 Weather Data Link
(XM) Page Menu
Figure 6-5 Weather Data Link (XM)
Page Setup Menu
Restoring default Weather Data Link (XM) Page settings:
1) Select the Weather Data Link (XM) Page with the FMS Knob.
2) Press the MENU Key.
3) With Weather Setup highlighted, press the ENT Key.
4) Press the MENU Key.
5) Highlight the desired default(s) to restore (all or for selection) and press the ENT Key.
190-00709-05 Rev. D Garmin G1000 Pilot's Guide for the Socata TBM 850/900 337