7.
Set the refresh settings as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Basic Settings] [Refresh Settings]
8.
Write the set parameters to the CPU module of the master station on CC-Link IE Field Network. Then, reset the CPU
module or power off and on the system.
[Online] [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
MELSEC iQ-R CC-Link IE Field Network User's Manual (Application)
Appendix 9 When Connecting the Module to a Remote Head Module
A
APPX
195