Appendix 6
Dedicated instructions facilitate programming for using intelligent function modules.
A master/local module can perform the following operations by using dedicated instructions.
• Transient transmission to a master station, local station, and intelligent device station
• Module parameter settings for a master station
List of dedicated instructions
For details on dedicated instructions, refer to the following.
MELSEC iQ-R Programming Manual (Module Dedicated Instructions)
Target station
Master station
Local station
Intelligent device station
Intelligent device station
Remote device station
Master station
APPX
168
Appendix 6 Dedicated Instruction
Dedicated Instruction
Instruction
Description
RIRD
Reads the specified points of data from the buffer memory or the device in the CPU module of
the target station.
RIWT
Writes the specified points of data to the buffer memory areas of the target station or the
device in the CPU module of the target station.
RIRCV
Automatically performs handshaking with the intelligent device station and reads data from
the buffer memory areas of the specified intelligent device station.
Available for communication with modules that have signals for the handshake, such as
AJ65BT-R2N.
RISEND
Automatically performs handshaking with the intelligent device station and writes data to the
buffer memory areas of the specified intelligent device station.
Available for communication with modules that have signals for the handshake, such as
AJ65BT-R2N.
RIFR
Reads data from the automatic update buffer of the intelligent device station or the random
access buffer.
Available for communication with modules that have the automatic update buffer, such as
AJ65BT-R2N.
RITO
Writes data to the automatic update buffer of the intelligent device station or the random
access buffer.
Available for communication with modules that have the automatic update buffer, such as
AJ65BT-R2N.
RDMSG
Reads/writes parameters from/to the remote device station and reads the status of the remote
device station.
Available for communication with the remote device station that supports the message
transmission function, such as NZ2AW1C2AL.
RLPASET
Sets the module parameters to the master station and starts up the data link.