4.
Click the [OK] button to add the module labels of the master/local module.
5.
Set the items in "Required Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ61BT11] [Required settings]
6.
Set the network configuration as follows.
[Navigation window] [Parameter] [Module Information] [RJ61BT11] [Basic Settings] [Network Configuration
Settings]
7.
Set the link refresh settings as follows.
[Navigation window] [Parameter] [Module Information] [RJ61BT11] [Basic Settings] [Link Refresh Settings]
3 PROGRAMMING
88
3.3 Communication Example Using the Standby Master Function