Versions; Viewing Power Management Unit Information - Tait TB8100 User Manual

Band
Power
Isolator
Alarm status
Serial number
Hardware
Firmware
Calibrated

Viewing Power Management Unit Information

Module
TB8100 Service Kit User's Manual
The RF frequency range that the PA is type-approved to operate in.
Specifies the RF power output rating of the PA. There are 5 W, 50 W, and
100 W variants.
Indicates whether the PA is fitted with an optional isolator.
Indicates whether the PA currently has any alarm conditions. If the LED is
green, there are no active alarms. If the LED is red, the text box displays 'Alarms
active,' and there is at least one active alarm. To see which alarm is active, select
Monitor > Alarms > Current Status.
A unique identifier assigned to the PA in the factory.

Versions

The Versions area (Monitor > Module Details > Power Amplifier) displays
version numbers for aspects of the PA.
The version number of the PA hardware.
The version number of the PA firmware and the date when the PA was updated
to its current firmware.
The date when the PA was last calibrated using the Calibration Kit.
The Power Management Unit form (Monitor > Module Details > Power
Management Unit) lets you view information about the PMU of the base
station you are logged onto. Use it if you need to confirm exactly what it is that
you are dealing with.
The name of the PMU. This non-editable name is used internally to identify
the module on the rack frame bus.
Module Details 69