H7 Optional Devices; Appendix G - Toshiba H7 Operation Manuals

Appendix G

H7 Optional Devices

The ASD may be equipped with several options which are used to expand the functionality of the ASD.
Table 18 lists the available options and their functions.
Item
ASD7-SIM2 Emulates the input control signals of the H7 ASD via switches and pots.
ASD-BPC Provides dust protection for the H7 ASD when the EOI is removed or mounted remotely.
ASD-CAB-PC Female 9-pin d-type to RJ-45 (PC to ASD cable).
ASD-EOI-N4 A replacement NEMA-4 EOI (without Rotary Encoder)
Provides isolation of the Control Board output circuit from the AM/FM output and from the II
ASD-ISO-1
input.
EOI Remote Mounting Kit. See the section titled
ASD-MTG-KIT
information on this option.
ASD-RTC The Real Time Clock provides the user with a time stamp of the Start, Run, and Fault events.
This option board is used to provide a hardware-based speed search function.
ASD-SS
ASD-TB1-AC1 Provides 120 VAC discrete terminal activation and additional I/O terminals.
Conduit Extender
Provides more working space for conduit installation than the standard conduit plate.
Box (option)
Provides rotational speed and/or directional information. The Encoder is mounted on the motor
HS35 Encoder
shaft or the shaft-driven equipment.
Note: Multicom boards are identified as ASD-Multicom-A, -B, -F, etc.
Incorporates the Modbus, Profibus, or Device Net communications protocol for system control
-A
and is able to receive and process Vector Control feedback.
-B Provides a line driver and open collector interface for system control.
The Tosline-F10 interface provides high-speed communication to Toshiba control equipment via
-F
twisted pair wiring.
-J Able to receive and process vector control feedback via line driver or open collector interface.
The Tosline-S20 interface provides high-speed communication to Toshiba control equipment via
-S
fiber optics.
-X Provides extended terminal I/O functions for monitoring, feedback, and control.
Note: See the user manual of the applicable option for further information on each item.
210
Table 18. H7 Optional devices and functions.
Device Function
Note: The ASD-SS is a factory-authorized service center-installed
option for all 1 – 5 HP ASDs, 10 – 25 HP 230 volt ASDs, and 15
– 40 HP 460 volt ASDs (see F314).
ASD – Multicom Option Boards
Appendix G
EOI Remote Mounting on pg. 200
H7 ASD Operation Manual
for further