Ace-Tronics G9 Asd Optional Devices - Toshiba ACE-tronics G9 ASD Installation And Operation Manual

ACE-tronics G9 ASD Optional Devices

The ASD may be equipped with several options which are used to expand the functionality.
lists the available options and their functions.
Part Identifier
ASD-CAB-USB G9/G7 USB Communication Cable
ASD-EOI-HH-G9 Display Module Docking Station
ASD-MTG-KIT9 9-Series EOI Remote Mounting Kit
ASD-TB1-SIM9 ASD Input/Output Signal Simulator
DEV002Z DeviceNet Module
ETB003Z Expansion I/O Board 1
ETB004Z Expansion I/O Board 2
PDP002Z ProfiBus DP Module
USB001Z USB-to-Serial Converter
VEC007Z PG Vector Feedback Board
VEC004Z PG Vector Feedback Board
VEC005Z PG Vector Feedback Board
VEC006Z PG Vector Feedback Board
Note: See the user manual of the applicable option for additional information on each item.
ACE-tronics G9 ASD Installation and Operation Manual
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Table 24. G9 ASD Optional Devices and Functions.
Device Name Device Function
Used to connect the ASD to a PC via the PC USB port.
Used to flash the 9-Series display module.
Hardware used to mount 9-Series ASD EOI remotely.
Used to simulate the ASD I/O monitor and control signals.
Allows the ASD to communicate via DeviceNet with
other DeviceNet-supported equipment including a host
computer.
Expands the Input/Output functionality of the ASD.
Expands the Input/Output functionality of the ASD.
Allows the ASD to communicate via ProfiBus with other
ProfiBus-supported equipment including a host computer.
Allows for the USB port of a computer to be used as a
communications port for monitoring and controlling the
ASD.
Allows for the use of Vector Control using a sensor (for
use with a 5-Volt encoder).
Allows for the use of Vector Control using a sensor (for
use with a 12-Volt encoder).
Allows for the use of Vector Control using a sensor (for
use with a 15-Volt encoder).
Allows for the use of Vector Control using a sensor (for
use with a 24-Volt encoder).
Table 24
277