Toshiba H7 Operation Manuals page 149

F516
Accel/Decel Pattern #4
Program Special Control Parameters
⇒
Settings
This parameter enables a user-selected preprogrammed output profile that
controls the acceleration and deceleration pattern for the #4 Accel/Decel
parameter.
Settings:
Linear
S-Pattern 1
S-Pattern 2
Accel/Decel Switching Frequency #3
Program Special Control Parameters
⇒
This parameter sets the frequency at which the acceleration control is switched
from the Accel #3 profile to the Accel #4 profile during a multiple-acceleration
profile configuration.
142
Accel/Decel #1 – #4
⇒
Accel/Decel Special
⇒
Direct Access Number — F516
Parameter Type — Selection List
Factory Default — Linear
Changeable During Run — Yes
Direct Access Number — F517
Parameter Type — Numerical
Factory Default — 0.00
Changeable During Run — Yes
Minimum — 0.00
Maximum — Max. Freq. (F011)
Units — Hz
H7 ASD Operation Manual
F517