Toshiba H7 Operation Manuals page 35

Adjust Accel/Decel Automatically?
When enabled, the H7 adjusts the acceleration and
deceleration rates according to the applied load. The
acceleration and deceleration times range from 12.5 to
800% of the programmed values for the active
acceleration time [e.g., Acceleration Time #1 (F009)
and Deceleration Time #1 (F010)].
The motor and the load must be connected prior to
selecting Automatic Accel/Decel.
If Automatic Accel/Decel is not enabled, the Acceleration screen will appear followed by the
Deceleration screen as shown below.
Acceleration Time
Volts per Hertz Setting
This function establishes the relationship between
the output frequency and the output voltage.
Settings:
Constant Torque
Variable Torque
Automatic Torque Boost
Sensorless Vector Control (Speed)
Automatic Torque Boost + Automatic Energy Savings
Sensorless Vector Control (Speed) + Automatic Energy Savings
V/f 5-point Setting (Opens 5-point Setting Screen)
Sensorless Vector Control (Speed/Torque Switching)
PG Feedback Vector Control (Speed/Torque Switching)
PG Feedback Vector Control (Speed/Position Switching)
Motor Current Rating
This parameter allows the user to input the full-load
amperage (FLA) of the motor. This value is used by
the ASD to determine the Thermal Overload
protection setting for the motor and may be found
on the nameplate of the motor.
28
Deceleration Time
H7 ASD Operation Manual