Returning a
Detector for Service
If you ship the detector to a Agilent oce or service center ll out a
service tag (provided at the back of this manual), and include the
following information:
1. Company name and address.
use an address with a P.O. box number because products
Do not
cannot be returned to a P.O. box.
2. A technical contact person with a complete phone number.
3. he complete model and serial number of the detector.
4. he type of service required (calibration, repair).
5. Any other information, such as failure condition or cause, that
could expedite service.
When you make an inquiry, either by mail or by telephone, refer to
the detector by both model number and full serial number.
Installation 2-7