Table of Contents
Advertisement
3
Input/Output Settings
Power Up Beeper
The scanner can be programmed to beep when it's powered up. Scan the Off bar code(s) if you don't want a power up beep.
Default = Power Up Beeper On - Scanner.
Power Up Beeper Off
* Power Up Beeper On
Beep on BEL Character
You may wish to force the scanner to beep upon a command sent from the host. If you scan the Beep on BEL On bar code
below, the scanner will beep every time a BEL character is received from the host. Default = Beep on BEL Off.
*Beep on BEL Off
Beep on BEL On
Trigger Click
To hear an audible click every time the scanner button is pressed, scan the Trigger Click On bar code below. Scan the Trigger
Click Off code if you don't wish to hear the click. (This feature has no effect on serial or automatic triggering.) Default = Trigger
Click Off.
*Trigger Click Off
Trigger Click On
3 - 1
Advertisement
Table of Contents
