Usb Ibm Surepos; Usb Pc Or Macintosh Keyboard - Honeywell Voyager 1450g Series User Manual

Area-imaging scanner
Hide thumbs Also See for Voyager 1450g Series:
Table of Contents

Advertisement

RS485 Packet Length
If you are using Packet mode, you can specify the size of the data "packet" that is sent to the host. Scan the Packet
Length bar code, then then the packet size (from 20 - 256) from the
manual, then Save. Default = 40.

USB IBM SurePos

Note: This interface is not supported by the Voyager 1450g2DHR.
Scan one of the following "Plug and Play" codes to program the scanner for an IBM SurePos (USB handheld scanner) or IBM
SurePos (USB tabletop scanner) interface.
Note: After scanning one of these codes, you must power cycle the cash register.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Each bar code above also programs the following suffixes for each symbology:

USB PC or Macintosh Keyboard

Scan one of the following codes to program the scanner for USB PC Keyboard or USB Macintosh Keyboard. Scanning these
codes also adds a CR and LF.
Symbology
Suffix
EAN 8
0C
EAN 13
16
UPC A
0D
UPC E
0A
Programming Chart
Packet Length
Symbology
Code 39
Interleaved 2 of 5
Code 128
Code 39
inside the back cover of this
USB IBM SurePos
(USB Tabletop Scanner)
Interface
Suffix
00 0A 0B
00 0D 0B
00 18 0B
00 0A 0B
USB Keyboard (Mac)
2 - 3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Voyager 1452g seriesVoyager 1450g2dhr series

Table of Contents