Table of Contents
Advertisement
Performance verification (MSO/DPO70000C, MSO/DPO70000DX, and DPO7000C series)
282
3. Record the reference level: Note the reading on the level meter.
4. Set the generator to the new frequency and reference level:
■
Change the sine wave generator to the desired new frequency.
■
Input the correction factor and/or the new frequency into the level meter.
■
Adjust the sine wave generator amplitude until the level meter again
reads the value noted in step 3. The signal amplitude is now correctly set
for the new frequency.
MSO70000C/DX, DPO70000C/DX, DPO7000C, MSO5000/B, DPO5000/B Series
Advertisement
Table of Contents
Need help?
Do you have a question about the MSO70000C/DX and is the answer not in the manual?
Questions and answers