Farmall 90 Manual page 98

98
10. Remove the retaining bolts (1) and the three
brackets (2) retaining the pipes, inserted on the
injection pump/injector connection line.
11. Remove the fittings (1) of the injector diesel deliv-
ery pipes and the fittings (2) of the injection pump
diesel return pipe, then detach the pipes.
12. Lock the engine flywheel with appropriate
means.
13. Before removing the injection pump, do the tim-
ing and lock the engine flywheel with cylinder
no. 1 at T.D.C. as indicated on page 100, using
tools 380000988 and 380000732. Then loosen
the bolt (2), remove the "L" spacer (1) and lock
the screw (2) in order to keep the pump in time
with the engine flywheel.
NOTE: Keep the "L" spacer with the pump casing.
SECTION 10 - - ENGINE - - CHAPTER 1
MIF0920A
210
211
212