Fuel Circuit Air Bleeding - Farmall 90 Manual

Fuel Circuit Air Bleeding

1. Loosen the injector delivery unions (1).
2. Make the engine turn with the starter motor.
3. After having checked that there are no air
bubbles, tighten the unions (1).
Op 10 402 10
COOLANT PUMP
Removal
DANGER
Lift and handle all heavy parts using suitable
lifting equipment.
Make sure that assemblies or parts are sup-
ported by means of suitable slings and hooks.
Check that no one is in the vicinity of the load to
be lifted.
1. Raise the hood (1).
2. Disconnect the battery negative cable.
3. Remove the three retaining bolts (1) and the
guard (2) on the right--hand side of the fan.
SECTION 10 - - ENGINE - - CHAPTER 1
1
MIF1167A
103
222
223
224