Fitting The Cooling System Union - Farmall 90 Manual

78

Fitting the Cooling System Union

(Assembly operation 27.)
1. Position the cooling system fitting so that the pins
(3 and 4) are against the crankcase.
2. Tighten the screws (1 and 2).
Fitting the Coolant Pump
(Assembly operation 26.)
1. Fit a new seal (2) onto the coolant pump (1).
2. Mount the coolant pump (1).
3. Screw down the screws (2) and tighten them to
the torque prescribed on page 12.
SECTION 10 - - ENGINE - - CHAPTER 1
MIF1005A
MIF0997A
MIF1150A
158
159
160