Fitting The Cylinder Head - Farmall 90 Manual

66

Fitting the Cylinder Head

(Disassembly operations 51. to 54.)
1. Lubricate the valve stem and insert into the rele-
vant valve--guides according to the position
marked during disassembly.
2. Fit the seals (1).
3. Position the following parts on the cylinder head:
spring (4) and top cap (3): using tool 380000302
(1) compress the spring (4) and retain the parts
to the valve (5) with the cotters (2).
4. Check that the mating surfaces (1) of the cylinder
head and crankcase are clean.
5. Do not dirty the cylinder head gasket.
NOTE: Before reusing the cylinder head retaining
bolts, check they show no sign of deterioration or de-
formation and replace them if they do.
SECTION 10 - - ENGINE - - CHAPTER 1
MIF1137A
MIF1138A
MIF1009A
1
122
123
124