Fitting The Tappets; Fitting The Camshaft - Farmall 90 Manual

Fitting the Tappets

(Disassembly operation 67.)
-- Lubricate the tappets (1) and fit them in their
seats in the crankcase.

Fitting the Camshaft

(Disassembly operation 65. to 66.)
-- Lubricate the bushings supporting the camshaft
and mount the camshaft (1) taking care that, dur-
ing this process, the bushings or the supporting
seats do not get damaged.
-- Position the plate (1) retaining the camshaft (2)
with the slot facing towards the top of the crank-
case and the punchmark facing the operator.
Tighten the screws (3) to the prescribed torque
stated on page 12.
SECTION 10 - - ENGINE - - CHAPTER 1
MIF1131A
MIF1129A
MIF1132A
57
95
96
97