Fitting The Oil Nozzles; Fitting The Crankshaft - Farmall 90 Manual

58
-- Check that the end float of the camshaft (1)
comes within the tolerance range prescribed on
page 10.

Fitting the Oil Nozzles

(Disassembly operation 64.)
-- Fit the nozzles (2) and tighten the retaining bolts
(1).

Fitting the Crankshaft

(Disassembly operations 60. to 63.)
-- If any sign of seizure, scoring or too much ovality
is found on the main journals or crankpins, they
must be reground. Before reconditioning the pins
(1), use a micrometer (2) to measure the pins of
the shaft and according to the undersizes given
on page 8, define the diameter to which the pins
must be reduced.
SECTION 10 - - ENGINE - - CHAPTER 1
MIF1133A
MIF0957A
MIF0958A
98
99
100