Fitting The Exhaust Manifold -- Turbine - Farmall 90 Manual

Fitting the Exhaust Manifold - - Turbine
(Disassembly operations 22. and 23.)
1. Mount the exhaust manifold (4) and tighten the
screws (3) to the torque prescribed on page 12.
2. Fit the turbine (1) with the screws (2).
Fitting the Injector Feed Pipes
(Assembly operations 20. to 21.)
1. Fit the injector feed pipe assembly (1).
2. Fit the injector fuel outlet pipes (2), using the
seals (4) and tighten the screws (3).
Fitting the Priming Pump - - Feed Pipes
(Disassembly operations 17. to 19.)
1. Fit the priming pump (5).
2. Fit the injector feed pipes (4) of the injection
pump (3), secure the brackets fixing the pipe as-
sembly (1), (2) and (6) on the cylinder head.
SECTION 10 - - ENGINE - - CHAPTER 1
MIF1156A
MIF1108A
MIF1107A
81
167
168
169