Big End Cap Assembly - Farmall 90 Manual

64
To measure the clearance proceed as follows:
-- Carefully clean the parts and remove all traces of
oil;
-- Position a length of calibrated wire (2) on the
crankshaft journals (1);
-- Fit the connecting rod caps (3) with the relevant
half bearings (4).

Big End Cap Assembly

(Disassembly operation 56.)
1. Tighten the screws (1) previously lubricated with
engine oil with a torque wrench (2) to the torque
prescribed on page 13.
2. Fit tool 380000304 (1) on the socket wrench and
further tighten the bolts (2) as prescribed on
page 13.
SECTION 10 - - ENGINE - - CHAPTER 1
MIF1077A
MIF0973A
MIF0974A
116
117
118