Installation - Farmall 90 Manual

88
8. To assemble and install, proceed as follows:

Installation

CAUTION
Always use appropriate tools to align fixing
holes. NEVER USE FINGERS OR HANDS.
To fit the front seal on the crankshaft, proceed as fol-
lows:
1. Fit part (6) of tool 380000664 on the rear shank
(3) of the crankshaft. Secure it with the screws (1)
and spline the new seal (2) onto it. Position part
(5) on part (6), screw down the nut (4) until the
seal (2) is completely fitted in the flywheel casing.
2. With a hoist and appropriate slinging, insert the
engine flywheel (1) on the pins (2) described
above, pushing it into contact with the crankshaft
(3).
SECTION 10 - - ENGINE - - CHAPTER 1
MIF1145A
MIF1116A
187
188