Disassembly - Farmall 90 Manual

42
Op 10 001 53

Disassembly

CAUTION
Handle all parts carefully. Do not put your hands
or fingers between parts. Wear the prescribed
safety clothing, including goggles, gloves and
safety footwear.
1. Remove the engine as described in operation
10 001 10, proceed as follows.
2. Drain off the engine oil by removing the plug from
the sump and the oil filler plug.
3. Detach the fan unit from the fan pulley.
4. To be able to fit the bracket 380000661 (for fixing
the engine to the overhaul stand) to the crank-
case, it is necessary to remove the wiring (1) from
the left--hand side of the engine.
5. To be able to fit the bracket 380000661 to the
crankcase on the right--hand side, remove the
starter motor (5), oil filter (3), clamp (4), and tur-
bine oil return pipe (1).
6. Secure the engine to the rotary stand 380000301.
Remove the oil delivery pipe (2).
SECTION 10 - - ENGINE - - CHAPTER 1
MIF1103A
MIF1104A
53
54