Special Tools - Farmall 90 Manual

14
WARNING
The operations described in this section can only
be carried out with ESSENTIAL tools indicated
by an (X).
To work safely and efficiently and obtain the best
results, it is also necessary to use the recom-
mended specific tools listed below and certain
other tools, which are to be made according to
the drawings included in this manual.
List of specific tools required for the various
operations described in this Section.
X 380000216 Engine removal and installation
tool.
380000220 Clamp for fitting piston in cylin-
der liner 2.3622--4.9212 in.
(60--125 mm).
X 380000221 Pliers for piston ring disassem-
bly and reassembly
2.5590--4.3307 in.
(65--110 mm).
380000301 Rotating stand for overhaul op-
erations (capacity 1000 daN,
torque 120 daN/m).
X 380000302 Tool for engine valve disassem-
bly and reassembly.
380000304 Pair of gauges for angular tight-
ening with 1/2" and 3/4" square
connection.
380000362 Crankshaft lifting tool.
X 380000364 Dial gauge base for various
measurements (use with
380000228).
380000569 Movable tool for dismantling
tractors with bracket 380000500
and adapter plate 380000844.
X 380000661 Engine mounting brackets for
rotating stand 380000301.
X 380000663 Tool to extract crankshaft rear
seal.
SECTION 10 - - ENGINE - - CHAPTER 1

SPECIAL TOOLS

X 380000664 Splining tool for fitting rear seal
on crankshaft.
X 380000665 Tool to extract crankshaft front
seal.
X 380000666 Splining tool for fitting front seal
on crankshaft.
X 380000667 Drift for camshaft bushing dis-
assembly and reassembly (use
with 380000668).
380000668 Grip for interchangeable drifts.
X 380000669 Gasket extraction tool.
X 380000670 Tool for cartridge filter disas-
sembly.
380000671 Injector extraction tool.
380000975 Box with full set of tools to re-
grind valve seats.
380000976 Spring load test appliance.
380001003 Complete square to check for
connecting rod distortion.
380001268 Belt tension gauge.
Injection pump bench test.
380000228 Dial gauge 0--5 mm
(0--019.68 in).
X 380000914 Dial--gauge holder tool for rotary
injection pump timing (use with
380000228).
X 380000732 Tool for engine flywheel rotation
(use with 380000988).
X 380000988 Plate for engine flywheel rota-
tion tool with flywheel timing pin
(use with 380000732).