80
6. Fit the fan pulley (2) on the support (1) with the
screws (3), tightening them to torque.
7. Fit the tightener (1), tightening the bolts (2) and
the tightener nut as directed on page 112.
Fitting the Auxiliary Member Drive Belt
(Disassembly operation 24.)
1. Fit the Poly--V belt (3) on the pulleys of the crank-
shaft, tightener (5) of the coolant pump (4), alter-
nator (1) and fan (2).
NOTE: Tension the belt correctly as indicated in op-
eration 10 414 10.
SECTION 10 - - ENGINE - - CHAPTER 1
MIF1153A
MIF1154A
MIF1155A
164
165
166