62
1. Using the pin (3) connect the piston (2) to the
connecting rod (4) so that the reference arrow (1)
for fitting the piston (2) in the cylinder liner is fac-
ing as described in point 2.
2. Insert the rings (2) retaining the pin (1).
3. To fit the rings (1) on the piston (3) use tool
380000221 (2).
NOTE: The piston rings (see page 8 to 9) are sup-
plied as spare parts in the following sizes:
--
standard, marked with yellow paint;
--
oversized by 0.5 mm (0.0196 in) and marked with
yellow/green paint;
SECTION 10 - - ENGINE - - CHAPTER 1
MIF0968A
MIF1060A
MIF0969A
110
111
112